Innovox Audio SLA-Micro

SLA-Micro

The SLA-Micro is a compact Frequency Shaded Line Array Loudspeaker employing an Air-Motion-Transformer (AMT)in conjunction with six 2.5” extended range drivers, all within an ultra-slim enclosure. It is designed to work in highly reverberant environments where very broad, uniform horizontal coverage and a focused vertical pattern are beneficial. A sophisticated filter circuit sequentially integrates drivers in the array to maintain pattern control to 650 Hz and ensures a smooth transition from line-source to point-source behavior at lower frequencies. The result is very flat frequency response and uniform pattern control, yielding superior speech clarity and musical detail.

Innovox Flex Array 1 loudspeaker

Flex Array 1

FlexArray 1 is a loudspeaker system designed to support video walls and large LED displays. They employ a combination of a curved line array with a dipole low frequency steering module, and a sophisticated powered DSP by PowerSoft. This unique powered hybrid achieves the precise vertical control and uniform back of room coverage that is essential for high speech intelligibility in longer reverberant spaces. Each FlexArray 1 system is dimension matched and factory configured for your project based on construction documents or contractor supplied field measurements in order to optimize its performance in your room. The FlexArray 1 modules are configurable based on the required coverage pattern and acoustical center of the speaker.

Innovox Audio Flex Synergy loudspeaker closeup

Flex Synergy 6 Plus

The Flex Synergy 6 Plus is a cutting-edge powered horizontal speaker expertly crafted for perfect synergy with compact conferencing cameras. Tailored specifically for the Huddly L1 camera, it ensures superior audio projection in larger spaces that fully utilize the L1’s capabilities. Importantly, it is compatible with a wide range of other compact camera models, making it a versatile choice for any setting. The Flex Synergy 6 Plus not only enhances audio clarity but also reduces distortion, providing an expansive frequency response that guarantees a seamless and engaging conferencing experience. The Flex Synergy 6 Plus is for installs greater than 98″ lengths. The Flex Synergy 6 Plus loudspeaker system boasts a sealed, equalized low-frequency module with dual low-profile 6.0” drivers and a mid/high-frequency module featuring two proprietary 3.5” Innovox drivers and an Air Motion Transformer (AMT). This combination significantly boosts clarity, transient response, and musical finesse, enriching the audio experience in any environment. For larger setups or stereo applications, multiple systems can be easily combined, making it ideal for dual displays or grand direct-view LED walls.

Innovox Audio Flex Synergy loudspeaker closeup

Flex Synergy 6 8698

The Flex Synergy 6 8698 is a cutting-edge powered horizontal speaker expertly crafted for perfect synergy with compact conferencing cameras. Tailored specifically for the Huddly L1 camera, it ensures superior audio projection in larger spaces that fully utilize the L1’s capabilities. Importantly, it is compatible with a wide range of other compact camera models, making it a versatile choice for any setting. The Flex Synergy 6 8698 not only enhances audio clarity but also reduces distortion, providing an expansive frequency response that guarantees a seamless and engaging conferencing experience. The Flex Synergy 6 8698 is available between 86″ – 98″ lengths. The Flex Synergy 6 8698 loudspeaker system boasts a sealed, equalized low-frequency module with dual low-profile 6.0” drivers and a mid/high-frequency module featuring two proprietary 3.5” Innovox drivers and an Air Motion Transformer (AMT). This combination significantly boosts clarity, transient response, and musical finesse, enriching the audio experience in any environment. For larger setups or stereo applications, multiple systems can be easily combined, making it ideal for dual displays or grand direct-view LED walls.

Innovox Audio Flex Synergy loudspeaker closeup

Flex Synergy 6 7585

The Flex Synergy 6 7585 is a cutting-edge powered horizontal speaker expertly crafted for perfect synergy with compact conferencing cameras. Tailored specifically for the Huddly L1 camera, it ensures superior audio projection in larger spaces that fully utilize the L1’s capabilities. Importantly, it is compatible with a wide range of other compact camera models, making it a versatile choice for any setting. The Flex Synergy 6 7585 not only enhances audio clarity but also reduces distortion, providing an expansive frequency response that guarantees a seamless and engaging conferencing experience. The Flex Synergy 6 7585 is available between 75″ – 85″ lengths. The Flex Synergy 6 7585 loudspeaker system boasts a sealed, equalized low-frequency module with dual low-profile 6.0” drivers and a mid/high-frequency module featuring two proprietary 3.5” Innovox drivers and an Air Motion Transformer (AMT). This combination significantly boosts clarity, transient response, and musical finesse, enriching the audio experience in any environment. For larger setups or stereo applications, multiple systems can be easily combined, making it ideal for dual displays or grand direct-view LED walls.

Innovox CPS12pt hanging pendant speaker

CPS-12PT

The CPS-12 PT is a high output, full-range, two-way point source loudspeaker housed in a compact pentagon enclosure. The multi-faceted design allows it to seamlessly disappear into its surrounding architecture. It features a Low-frequency section with a reflex-tuned 12” driver, and a high-frequency section with a 1” exit compression driver mounted coaxially on the low-frequency driver. The CPS-12 PT coincident driver orientation enables it to produce wide symmetrical coverage on both the horizontal and vertical axes. Its Baltic birch construction and 16-gauge perforated grille make it highly resistant to damage in active environments, ie basketballs. The CPS 12 PT is available as a low-z (8 ohm) configuration or in a high-z configuration with EDCO USA 70 or 100 V transformers. It is also available in a verity of colors, the standard black/white or as a custom color upon request.

Innovox sub woofer

SLF-212

The SLF-212 is a compact, sealed sub-bass loudspeaker featuring two high-performance, long-excursion 12” drivers housed in a robust 0.75” Baltic birch enclosure. It’s finished in a durable Warnex textured coating, available in standard black or white, with custom colors offered to blend seamlessly into surrounding architecture. Engineered to extend the low-frequency response of our CLA and HLA loudspeaker families, the SLF-212’s sealed design delivers exceptional transient response while maintaining usable frequency extension well below 40 Hz. For flexible installation, the SLF-212 includes an extensive array of 3/8”- 16 fly points on all surfaces, allowing for easy and secure rigging in a variety of configurations. Available variations: SLF-118 (one 18″ driver), SLF-215 (two 15″ drivers), SLF-218 (two 18″ drivers).

INNOVOX AUDIO LOUDSPEAKER FLEX PRECISION

FP-H2 3250 P (powered)

The FP-H2 3250 P is a display mounted two-channel, self-powered horizontal loudspeaker that employs ribbon HF and extended range LF drivers in an ultra slim enclosure. Its frequency response (120 Hz – 20 kHz ± 3 dB) has been optimized for speech intelligibility and musical detail. The FP-H2 3250 P loudspeaker has two 100-watt Class D amplifiers. Flex Precision loudspeakers can be used in combination with an Innovox Micro-Sub Series sub-woofer to extend low frequency response below 50 Hz to support full-range music program.

Innovox audio cla-435 speaker

CLA-435

The CLA-435 is a four-element line-array loudspeaker designed for speech reinforcement in challenging acoustic environments. It features four 3.5-inch mid-frequency and four ribbon high-frequency drivers, delivering outstanding speech intelligibility and musical detail. This loudspeaker comes pre-configured with a 35° vertical and 120° horizontal coverage pattern. It effectively maintains vertical control to 1000Hz and has a usable frequency range of 150 Hz to 20 kHz. The CLA-435 is specifically engineered to seamlessly integrate into any CLA deployment, ensuring effective coverage and intelligibility in larger spaces.

INNOVOX AUDIO LOUDSPEAKER FLEX FOCUS

FF-H1.50 5070 P (powered)

The FF-H1.50 5070 P loudspeaker uses shaded line array technology with ribbon high frequency drivers to extend sound projection in longer rooms. Their frequency response (120 Hz – 20kHz±± 3 dB) is optimized for speech intelligibility and musical detail. The FF-H1.50 5070 P loudspeaker can be used in combination with an Innovox Micro-Sub Series subwoofer to extend low frequency response to support full-range music program. The FF-H1.50 5070 P loudspeaker employs a 100-watt class D power amplifier.

INNOVOX AUDIO LOUDSPEAKER FLEX FOCUS

FF-H1.50 5070

The FF-H1.50 5070 loudspeaker employs shaded line array technology with ribbon high frequency drivers to extend sound projection in longer rooms. Their frequency response (120 Hz – 20 kHz ± 3 dB) is optimized for speech intelligibility and musical detail. The FF-H1.50 5070 loudspeaker pairs can be used in combination with an Innovox Micro- Sub Series subwoofer to extend low frequency response to support full-range music program.

INNOVOX AUDIO LOUDSPEAKER FLEX FOCUS

FF-H1.50 7585 P / FF-H1.50 8698 P (powered)

The FF-H1.50 7585 P / FF-H1.50 8698 P loudspeaker uses shaded line array technology with ribbon high frequency drivers to extend sound projection in longer rooms. Their frequency response (120 Hz – 20kHz± 3 dB) is optimized for speech intelligibility and musical detail. The FF-H1.50 7585 P / FF-H1.50 8698 P loudspeaker can be used in combination with an Innovox Micro-Sub Series subwoofer to extend low frequency response to support full-range music program. The FF-H1.50 7585 P / FFH1.50 8698 P loudspeaker employs a 100-watt amplifier.

INNOVOX AUDIO LOUDSPEAKER FLEX FOCUS

FF-H1.50 7585 / FF-H1.50 8698

The FF-H1.50 7585 / FF-H1.50 8698 loudspeaker employs shaded line array technology with ribbon high frequency drivers to extend sound projection in longer rooms. Their frequency response (120 Hz – 20 kHz ± 3 dB) is optimized for speech intelligibility and musical detail. The FF-H1.50 7585 / FF-H1.50 8698 loudspeaker pairs can be used in combination with an Innovox Micro-Sub Series subwoofer to extend low frequency response to support full-range music program.

INNOVOX AUDIO LOUDSPEAKER FLEX FOCUS

FF-H1.25 7585 P / FF-H1.25 8698 P (powered)

The FF-H1.25 7585 P / FF-H1.25 8698 P loudspeaker employs shaded line array technology with ribbon high frequency drivers to extend sound projection in longer rooms. Its frequency response (120-20,000Hz ±3dB) is optimized for speech intelligibility and musical detail. The FF-H1.25 7585 P / FF-H1.25 8698 P loudspeaker can be used in combination with an Innovox Micro- Sub Series subwoofer to extend low frequency response to support full-range music program. The FF-H1.25 7585 P / FF-H1.25 8698 P loudspeaker employs a 100-watt class D power amplifier.

INNOVOX AUDIO LOUDSPEAKER FLEX FOCUS

FF-H1.25 7585 – FF-H1.25 8698

The FF-H1.25 7585 / FF-H1.25 8698 loudspeaker employs shaded line array technology with ribbon high frequency drivers to extend sound projection in longer rooms. Their frequency response (120-20,000Hz ±3dB) is optimized for speech intelligibility and musical detail. The FF-H1.25 7585 / FF-H1.25 8698 loudspeaker pairs can be used in combination with an Innovox Micro-Sub Series subwoofer to extend low frequency response to support full-range music program.

INNOVOX AUDIO LOUDSPEAKER FLEX FOCUS

FP-H1 3250 P (powered)

he Flex Precision FP-H1 3250 P is a self-powered, display mounted single-channel horizontal loudspeaker that employs ribbon HF and extended range LF drivers in an ultra slim enclosure. Its frequency response (120 Hz – 20 kHz ± 3 dB) has been optimized for speech intelligibility. Flex Precision loudspeakers can be used in combination with an Innovox Micro-Sub Series sub-woofer to extend low frequency response below 50 Hz to support full-range music program. The FP-H1 3250 P horizontal loudspeaker includes a 100-watt class D power amplifier.

INNOVOX AUDIO LOUDSPEAKER FLEX PRECISION

FP-H3 6585

The FP-H3 6585 is a display mounted three-channel horizontal loudspeaker that employs ribbon HF and extended range LF drivers in an ultra slim enclosure. Its frequency response (120 Hz – 20 kHz ± 3 dB) has been optimized for speech intelligibility and musical detail. Flex Precision loudspeakers can be used in combination with an Innovox Micro-Sub Series sub-woofer to extend low frequency response below 50 Hz to support full-range music program.

INNOVOX AUDIO LOUDSPEAKER FLEX PRECISION

FP-H2 3250

The Flex Precision FP-H2 3250 is a display mounted dual-channel horizontal loudspeaker that employs ribbon HF and extended range LF drivers in an ultra slim enclosure. Its frequency response (120 Hz – 20 kHz ± 3 dB) has been optimized for speech intelligibility. Flex Precision loudspeakers can be used in combination with an Innovox Micro-Sub Series sub-woofer to extend low frequency response below 50 Hz to support full-range music program.

INNOVOX AUDIO LOUDSPEAKER FLEX FOCUS

FP-H1 3250

The Flex Precision FP-H1 3250 is a display mounted single-channel horizontal loudspeaker that employs ribbon HF and extended range LF drivers in an ultra slim enclosure. Its frequency  response (120 Hz – 20 kHz ± 3 dB) has been optimized for speech intelligibility. Flex Precision loudspeakers can be used in combination with an Innovox Micro-Sub Series sub-woofer to extend low frequency response below 50 Hz to support full-range music program.

INNOVOX AUDIO LOUDSPEAKER SUB WOOFER

DLFC-308

The DLFC-308 is a dipole, cardioid-configured loudspeaker purpose-built to enhance the mid-bass performance of CLA Series Line Arrays in biamplified or triamplified system configurations. It features three 8” drivers, each housed in a separate sealed enclosure—two front-facing and one rear-facing. The front-facing drivers are precisely spaced to generate a dipole cancellation effect between 150 Hz and 325 Hz, delivering extended vertical pattern control and enhanced intelligibility. The rear-facing driver provides cardioid behavior, minimizing low-frequency radiation behind the enclosure. Below 150 Hz, the DLFC-308 operates as a conventional low-frequency system, delivering powerful and clear low-end support. Each driver is independently terminated, allowing for individual delay and level adjustments. This enables vertical beam steering—either upward or downward—tailored for acoustically reflective or architecturally sensitive spaces.

INNOVOX AUDIO LOUDSPEAKER SUB WOOFER

DLFC-608

The DLFC-608 is a dipole, cardioid-configured loudspeaker purpose-built to enhance the mid-bass performance of CLA Series Line Arrays in biamplified or triamplified system configurations. It features six 8” drivers, each housed in a separate sealed enclosure—four front-facing and two rear-facing. The front-facing drivers are precisely spaced to generate a dipole cancellation effect between 150 Hz and 325 Hz, delivering extended vertical pattern control and enhanced intelligibility. The rear-facing drivers provide cardioid behavior, minimizing low-frequency radiation behind the enclosure. Below 150 Hz, the DLFC-308 operates as a conventional low-frequency system, delivering powerful and clear low-end support. Each driver is independently terminated, allowing for individual delay and level adjustments. This enables vertical beam steering—either upward or downward—tailored for acoustically reflective or architecturally sensitive spaces.

Innovox Audio Flex Synergy loudspeaker closeup

Flex Synergy 6 Solo

The Flex Synergy 6 Solo is a cutting-edge powered horizontal speaker expertly crafted for perfect synergy with compact conferencing cameras. Tailored specifically for the Huddly L1 camera, it ensures superior audio projection in larger spaces that fully utilize the L1’s capabilities. Importantly, it is compatible with a wide range of other compact camera models, making it a versatile choice for any setting. The Flex Synergy 6 Solo not only enhances audio clarity but also reduces distortion, providing an expansive frequency response that guarantees a seamless and engaging conferencing experience. The Flex Synergy 6 Solo is 57.5″ fixed length. The Flex Synergy 6 Solo loudspeaker system boasts a sealed, equalized low-frequency module with dual low-profile 6.0” drivers and a mid/high-frequency module featuring two proprietary 3.5” Innovox drivers and an Air Motion Transformer (AMT). This combination significantly boosts clarity, transient response, and musical finesse, enriching the audio experience in any environment.

INNOVOX AUDIO LOUDSPEAKER CURVILINEAR LINE ARRAY DIPOLE LOW FREQUENCY

DLFC-608/CLA 2035

The DLFC-608/CLA 2035 is a dipole steered, low frequency, sub bass cardioid combined with a curvilinear line array.  This combination creates a powerful, compact full range music system. Cardioid Sub-Bass loudspeakers are designed to extend the low-frequency response, projection and precise directional control of the CLA system. The DLFC-608 has six 8” forward  facing drivers and two rear cancellation drivers. It is designed to match the superb transient response of the CLA line array. The dipole drivers are oriented with a vertical spacing which defines an octave wide controlled coverage band, below which the loudspeaker behaves as a conventional LF system. Steering of the LF lobe can be achieved by applying a signal delay to the lower drivers. The CLA-2035 series loudspeaker is a twenty element j-array.  It has twenty 3.5” mid-frequency drivers and twenty ribbon high-frequency drivers.  The CLA-2035 series loudspeakers have been optimized for speech applications in acoustically challenging spaces. The CLA-2035 is preconfigured in asymmetrical 35° V by 120° H coverage patterns with vertical directivity to 275 Hz, and low-frequency response to 100 Hz.

INNOVOX AUDIO LOUDSPEAKER CURVILINEAR LINE ARRAY DIPOLE LOW FREQUENCY

DLFC-308/CLA 935

The DLFC-308/CLA 935 is a dipole steered, low frequency, sub bass cardioid combined with a curvilinear line array.  This combination creates a powerful, compact full range music system. Cardioid Sub-Bass loudspeakers are designed to extend the low-frequency response, projection and precise directional control of the CLA system. The DLFC-808 has three 8” forward  facing drivers and one rear cancellation driver. It is designed to match the superb transient response of the CLA line array. The dipole drivers are oriented with a vertical spacing which defines an octave wide controlled coverage band, below which the loudspeaker behaves as a conventional LF system. Steering of the LF lobe can be achieved by applying a signal delay to the lower drivers. The CLA-935 series loudspeaker is a nine element j-array.  It has twenty 3.5” mid-frequency drivers and twenty ribbon high-frequency drivers.  The CLA-935 series loudspeakers have been optimized for speech applications in acoustically challenging spaces. The CLA-935 has been preconfigured in an asymmetrical 35° V by 120° H coverage pattern with vertical directivity to 600 Hz, and low frequency response to 100 Hz.

Innovox Audio Flex Synergy loudspeaker closeup

Flex Synergy

 Flex Synergy offers a modular completely customizable, yet totally modular, solution to combine uncompromising sound with unparalleled configurability for aesthetically and sonically seamless audio solutions.

INNOVOX AUDIO SPEAKER HLA-UB

HLA-UB1

The HLA-UB1 is a M/HF loudspeaker specifically designed to extend the projection of an HLA Hybrid Line Array and achieve precise under balcony coverage. It can also be used to enhance articulation in other near field applications. A 6” ribbon HF driver with wave guide and four 3.5 MF drivers are employed to match the clarity, detail and program level of other HLA loudspeakers. The enclosure’s shallow depth allows easy integration into the architectural environment.

INNOVOX AUDIO SPEAKER HLA-STAGE LIP

HLA-Stage Lip 25/50

The HLA-Stage Lip 25/50 is a companion loudspeaker specifically designed to work in conjunction with an HLA hybrid line array to better serve front row seats. It provides both enhanced articulation and helps to localize the apparent sound source with performers on stage. A 6” ribbon HF driver and two 3.5 MF drivers are employed to match the clarity, detail and program level of other HLA loudspeakers. The enclosure’s shallow depth allows easy integration into the architectural environment.

INNOVOX AUDIO SPEAKER HLA-1620

HLA-1620P

The HLA-1620P is a hybrid integration of a sixteen element J-array loudspeaker and a dipole directional low frequency loudspeaker. It is powered by two Powersoft internal 1500W amplifiers with on-board DSP. The J-array portion contains sixteen 3.5” mid-frequency drivers and sixteen ribbon high frequency drivers. The low frequency portion incorporates two 14” high-output low frequency drivers in a dipole configuration to extend vertical LF control. It has been preconfigured in an asymmetrical 120° H by 20° V coverage pattern with vertical directivity to 135 Hz, and low frequency response to 50 Hz.

INNOVOX AUDIO LOUDSPEAKER CURVILINEAR LINE ARRAY

CLA-2020

The CLA-2020 is a twenty element J-array loudspeaker. It has twenty 3.5” mid-frequency drivers and twenty ribbon high frequency drivers. The CLA-2020 has been optimized for speech applications in acoustically challenging spaces. It can also serve as an articulation extender in large scale sound systems. The CLA-2020 has been preconfigured in an asymmetrical 20° V by 120° H coverage pattern with vertical directivity to 275 Hz, and low frequency response to 100 Hz. When it is combined with an Innovox DLF Series dipole LF loudspeaker, low frequency response is extended below 50 Hz, resulting in a compact full range loudspeaker system.

INNOVOX AUDIO SPEAKER AE NANOMONITOR

Nano Monitor-AE

The Nano Monitor-AE is an ultra-slim 2-way loudspeaker designed to be used in a wide range of critical, near-field applications. It employs a precision Air Motion Transformer HF driver and two 40mm long-excursion mid bass drivers to deliver the exceptional definition and the voice clarity of face-to-face communication. Two Nano Monitor-AE‘s can be combined with an available Innovox micro subwoofer, to extend LF frequency response to 50 Hz and create an ultra-compact 2.1 system.

INNOVOX AUDIO MICROTILT LOUDSPEAKER

SLA-Microtilt

The SLA-Microtilt is a compact, high output Frequency Shaded Line Array loudspeaker employing an AMT ribbon HF driver and six 2.5” LF drivers within a very low profile enclosure. Its construction positions the HF driver with a 7° downward tilt, which is optimal for flat on-wall mounting of the loudspeaker above ear level. A proprietary filter circuit tilts the LF acoustic center down 7° to match the HF driver, while sequentially integrating drivers in the array to maintain pattern control below 1kHz. This ensures a smooth transition from line-source to point-source behavior at lower frequencies. The result is very flat response and uniform pattern control, yielding superior speech clarity and musical detail.

INNOVOX AUDIO SPEAKER SLA-10.1

SLA-10.1

The SLA-10.1 is a high output Frequency Shaded Line Array loudspeaker employing a ribbon HF driver and ten 4” LF drivers within a slim profile enclosure.  It is designed to work in highly reverberant environments where its broad 120° horizontal coverage and focused 25° vertical pattern are beneficial.

INNOVOX AUDIO LOUDSPEAKER SLA SLIM

SLA-6.1 Slim

The SLA-6.1 slim is a Frequency Shaded Line Array loudspeaker employing a ribbon HF driver and six 3.5” LF drivers within an ultra slim profile enclosure (only 2.1” deep).  It is designed to work in highly reverberant environments where its broad 120° horizontal coverage and focused 25° vertical pattern are beneficial.

INNOVOX AUDIO LOUDSPEAKER SLA 6.1

SLA-6.1

The SLA-6.1 is a high output frequency Shaded Line Array loudspeaker employing a ribbon HF driver and six 4” LF drivers within a slim profile enclosure.  It is designed to work in highly reverberant environments where its broad 120° horizontal coverage and focused 25° vertical pattern are beneficial.

INNOVOX AUDIO LOUDSPEAKER SLA 4.1 TILT

SLA 4.1 Tilt

The SLA-4.1 tilt is a high output frequency Shaded Line Array loudspeaker employing a ribbon HF driver and four 4” LF drivers within a very slim profile enclosure.  It is designed to work in highly reverberant environments where its broad 120° horizontal coverage and focused 25° vertical pattern are beneficial. The SLA-4.1 tilt‘s unique construction positions the HF driver with a 10°downward tilt, which is optimal for flat on-wall mounting of the loudspeaker above ear level.

INNOVOX AUDIO LOUDSPEAKER SLA 4.1 90X35

SLA-4.1 90×35

The SLA-4.1 (90×35) is a compact frequency Shaded Line Array loudspeaker optimized for 90° H x 35° V coverage.  It employs a high output ribbon driver on an HF Wave Guide, and four 4” LF drivers within a slim profile enclosure.  It is designed to work in highly reverberant environments where a uniform horizontal coverage and a focused 35° vertical pattern are beneficial.

INNOVOX AUDIO LOUDSPEAKER SLA 4.1

SLA-4.1

The SLA-4.1 is a high output frequency Shaded Line Array loudspeaker employing a ribbon high-frequency driver and four 4” low-frequency drivers within a very slim profile enclosure.  It is designed to work in highly reverberant environments where its broad 120° horizontal coverage and a focused 25° vertical pattern are beneficial.

INNOVOX AUDIO LOUDSPEAKER HLA-2050

HLA-2050P / HLA-2050RP

The HLA-2050P is a hybrid integration of a twenty element J-array loudspeaker and dipole directional low frequency loudspeakers. It is powered by a 6000-watt Powersoft amplifier with on-board DSP. The J-array portion contains twenty 3.5” mid-frequency drivers and twenty ribbon high frequency drivers. The dipole has four 6.5” mid-bass drivers and two 15” high output low frequency drivers, in a unique staged configuration to extend vertical LF control. It has been preconfigured in an asymmetrical 120°H x 50° V coverage pattern with vertical directivity to 96 Hz, and low frequency response to 50 Hz. The HLA-2050RP is a rack mounted variant. It is powered by a Powersoft rack-mounted amplifier with DSP and 6000-Watts of managed class D power.

INNOVOX AUDIO LOUDSPEAKER HLA-2035

HLA-2035P / HLA-2035RP

The HLA-2035P is a hybrid integration of a twenty element J-array loudspeaker and dipole directional low frequency loudspeakers. It is powered by a 4500-watt Powersoft amplifier with on-board DSP. The J-array portion contains twenty 3.5” mid-frequency drivers and twenty ribbon high frequency drivers. The dipole has four 6.5” mid-bass drivers and two 15” high output low frequency drivers, in a unique staged configuration to extend vertical LF control. It has been preconfigured in an asymmetrical 120° H by 35° V coverage pattern with vertical directivity to 96 Hz, and low frequency response to 50 Hz. The HLA-2035RP is a rack mounted variant. It is powered by a Powersoft rack-mounted amplifier with DSP and 2800-Watts of managed class D power.

INNOVOX AUDIO LOUDSPEAKER HLA-1650

HLA-1650P / HLA-1650RP

The HLA-1650P is a hybrid integration of a sixteen element J-array loudspeaker and a dipole directional low frequency loudspeaker. It is powered by two Powersoft internal 1500W amplifiers with on-board DSP. The J-array portion contains sixteen 3.5” mid-frequency drivers and sixteen ribbon high frequency drivers. The low frequency portion incorporates two 14” high-output low frequency drivers in a dipole configuration to extend vertical LF control. It has been preconfigured in an asymmetrical 120° H by 50° V coverage pattern with vertical directivity to 135 Hz, and low frequency response to 50 Hz. The HLA-1650RP is a rack mounted variant. It is powered by a Powersoft rack-mounted amplifier with DSP and 2800-Watts of managed class D power.

INNOVOX AUDIO LOUDSPEAKER HLA-1635

HLA-1635P / HLA-1635RP

The HLA-1635P is a hybrid integration of a sixteen element J-array loudspeaker and a dipole directional low frequency loudspeaker. It is powered by two Powersoft internal 1500W amplifiers with on-board DSP. The J-array portion contains sixteen 3.5” mid-frequency drivers and sixteen ribbon high frequency drivers. The low frequency portion incorporates two 14” high-output low frequency drivers in a dipole configuration to extend vertical LF control. It has been preconfigured in an asymmetrical 120° H by 35° V coverage pattern with vertical directivity to 135 Hz, and low frequency response to 50 Hz. The HLA-1635RP is a rack mounted variant. It is powered by a Powersoft rack-mounted amplifier with DSP and 2800-Watts of managed class D power.

Innovox loudspeakers HLA-850 V and HLA-850 SxS

HLA-850V / HLA-850SxS

The HLA-850V and HLA-850SxS are self-powered hybrid integrations of an eight-element J–array and a directional dipole low-frequency loudspeaker pair. This unique integration yields precise vertical control not previously possible in such a compact package. It is available in a vertical configuration (HLA-850V) or a side-by-side configuration (HLA-850SxS). The V and SxS variations are functionally identical and are offered as alternatives based on dimensional and aesthetic needs. The line source portion contains eight proprietary 3.5” mid-range and eight high-frequency ribbon drivers. The low-frequency portion incorporates two 8” low-frequency drivers in a dipole configuration to extend vertical LF control not otherwise achieved in this compact foot print. An onboard Innovox DSP–amplifier provides 1600W of Class D power. The HLA-850 has been pre-configured for an asymmetrical 120° H by 50° V coverage pattern with vertical directivity to 240 wHz, and LF frequency response to 60 Hz.

Innovox loudspeakers HLA-835V and HLA-835 SxS

HLA-835V / HLA-835SxS

The HLA-835V and HLA-835SxS are self-powered hybrid integrations of an eight-element J–array and a directional dipole low-frequency loudspeaker pair. This unique integration yields precise vertical control not previously possible in such a compact package. It is available in a vertical configuration (HLA-835V) or a side-by-side configuration (HLA-835SxS). The V and SxS variations are functionally identical and are offered as alternatives based on dimensional and aesthetic needs. The line source portion contains eight proprietary 3.5” mid-range and eight high-frequency ribbon drivers. The low-frequency portion incorporates two 8” low-frequency drivers in a dipole configuration to extend vertical LF control not otherwise achieved in this compact foot print. An onboard Innovox DSP–amplifier provides 1600W of Class D power. The HLA-835 has been pre-configured for an asymmetrical 120° H by 35° V coverage pattern with vertical directivity to 240 wHz, and LF frequency response to 60 Hz.

Innovox loudspeakers HLA-820 V and HLA-820 SxS

HLA-820V / HLA-820SxS

The HLA- 820V and HLA-820SxS are self-powered hybrid integrations of an eight-element J–array and a directional dipole low-frequency loudspeaker pair. This unique integration yields precise vertical control not previously possible in such a compact package. It is available in a vertical configuration (HLA-820V) or a side-by-side configuration (HLA-820SxS). The V and SxS variations are functionally identical and are offered as alternatives based on dimensional and aesthetic needs. The line source portion contains eight proprietary 3.5” mid-range and eight high-frequency ribbon drivers. The low-frequency portion incorporates two 8” low-frequency drivers in a dipole configuration to extend vertical LF control not otherwise achieved in this compact foot print. An onboard Innovox DSP–amplifier provides 1600W of Class D power. The HLA-820 has been pre-configured for an asymmetrical 120° H by 20° V coverage pattern with vertical directivity to 240 wHz, and LF frequency response to 60 Hz.

INNOVOX AUDIO LOUDSPEAKER SUB WOOFER

SCS-321P

The SCS-321P is a self-powered cardioid sub-bass loudspeaker, designed to match the superb transient response of a CLA or HLA Hybrid Line Array. It extends system low frequency response, projection and directional control to 28 Hz. Three 21-inch long-excursion drivers are employed in a cardioid configuration using on-board Powersoft DSP and amplification. The drivers have (.7Q) sealed enclosures for optimum transient response.

INNOVOX AUDIO LOUDSPEAKER SUB WOOFER

SCS-318P

The SCS-318P is a self-powered cardioid sub-bass loudspeaker, designed to match the superb transient response of a CLA or HLA Hybrid Line Array. It extends system low frequency response, projection and directional control to 35 Hz. Three 18-inch long-excursion drivers are employed in a cardioid configuration using on-board Powersoft DSP and amplification. The drivers have (.7Q) sealed enclosures for optimum transient response.

INNOVOX AUDIO LOUDSPEAKER SUB WOOFER

SCS-315P

The SCS-315P is a self-powered cardioid sub-bass loudspeaker, designed to match the superb transient response of a CLA or HLA Hybrid Line Array. It extends system low frequency response, projection and directional control to 38 Hz. Three 15-inch long-excursion drivers are employed in a cardioid configuration using on-board Powersoft DSP and amplification. The drivers have (.7Q) sealed enclosures for optimum transient response.

INNOVOX AUDIO LOUDSPEAKER SUB WOOFER

SCS-312P

The SCS-312P is a self-powered cardioid sub-bass loudspeaker, designed to match the superb transient response of a CLA or HLA Hybrid Line Array. It extends system low frequency response, projection and directional control to 45 Hz. Three 12-inch long-excursion drivers are employed in a cardioid configuration using on-board Powersoft DSP and amplification. The drivers have (.7Q) sealed enclosures for optimum transient response.

INNOVOX AUDIO LOUDSPEAKER SUB WOOFER

SBA-218

The SBA-218 employs a pair of 18-inch long-excursion drivers in an optimally tuned vented enclosure. It is an ideal choice for applications requiring precise transient response and low bass extension in a compact very high output package. The SBA-218 is frequently used as a single unit, or in multiples to create cardioid bass arrays. Its compact size fits well under stages or on stage.

INNOVOX AUDIO LOUDSPEAKER SUB WOOFER

SBA-118

The SBA-118 is a very compact sub-bass module designed for permanent installation. It employs an 18-inch long-excursion driver in an optimally tuned vented enclosure which can be suspended from internal fly points or positioned on the floor. The SBA-118 is an ideal choice for applications requiring precise transient response and low bass extension. Its compact size fits well under stages, on stage, and in flown arrays.